leaded oscillator, ocxo metal package, 25.7 mm x 25.7 mm i416 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 5/11 specifications subj ect to change without noti ce p age 1 product features: applications: low phase noise telecommunications low power consumption data communications voltage control instrumentation high stability test and measurement part number guide sample part number: i416-5aa3v-10.000 mhz *input voltage dependant. frequency 10.000 mhz- 30.000 mhz output level sine +7dbm min., 9dbm max. output load 50 ohms harmonics -50 dbc spurious -80 dbc frequency stability see frequency stability table supply voltage see voltage table (5%) current (warm up) current @ 25 ? c (steady state) 125 ma max. 50 ma voltage control voltage range pullability deviation slope (positive) 0.0 vdc min., 10.0 vdc max. * 3.0ppm* 10% hysteresis (retrace after 30min.) 20.0 ppb allan variance (1s) 2.00e-11 phase noise - 90 dbc/hz @ 1hz -120 dbc/hz @ 10hz -145 dbc/hz @ 100hz -155 dbc/hz @ 1khz -165 dbc/hz @ 10khz -165 dbc/hz @ 100khz operating see operating temperature table in part number guide storage -40 ? c to +85 ? c package input voltage operating temperature output frequency stability (in ppm) voltage control frequency i416 - 5 = 5.0v 7 = 0 ? c to +50 ? c a = sine y = ? 0.5 v = controled -10.000 mhz 9 = 12.0v 1 = 0 ? c to +70 ? c 1 = ? 0.25 f = fixed 6 = -10 ? c to +75 ? c 2 = ? 0.1 3 = -20 ? c to +70 ? c 3 = ? 0.05 a= -30 ? c to +70 ? c
leaded oscillator, ocxo metal package, 25.7 mm x 25.7 mm i416 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 5/11 specifications subj ect to change without noti ce p age 2 pb free solder reflow profile: typical application: *units are backward compatible with 240c reflow processes package information: msl = n.a. (package does not contain plastic, storage life is unlimited under normal room conditions). termination = e1 (sn / cu / ag over ni over kovar base metal). environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code line 2: xxxxxx (part number detail = i416-xxxxxx-freq.) line 2: frequency
|
